Low-E Insulated Glass

Energy-saving Low-E coated insulated glass for villa, commercial curtain wall and passive energy-saving buildings

Product Specifications

• Full Name: Low-E Tempered Insulated Glass
• Glass Substrate: Clear tempered glass / tinted tempered glass (Euro grey, crystal grey optional)
• Low-E Coating Type: Single silver Low-E, double silver Low-E, triple silver Low-E optional
• Spacer: Aluminum spacer / warm edge spacer for low heat bridge
• Cavity Filling: Dry air; Argon gas filling available for better heat insulation
• Common Combination Specification: 5+12A+5 Low-E, 6+12A+6 Low-E
• Min Processing Size: Orders with area less than 0.3㎡ will be calculated as 0.3㎡
• Max Processing Size: 3660 × 2440 mm; over-size panel requires separate quotation
• Surface & Edge Finish: Fine polished edge, hole drilling and special cutting supported
• Processing Remarks: Warm edge spacer, argon filling and triple silver Low-E incur extra processing cost
• Sealing Structure: Double sealing system (butyl rubber + polysulfide / silicone sealant)
• UV Blocking Rate: Up to 99% ultraviolet isolation
• Thermal Performance: Low U-value, excellent heat insulation and heat reflection
• Safety Performance: Tempered glass substrate, broken into harmless obtuse particles

Product Advantages

Excellent Heat Insulation & Energy Saving

Low-E coating can reflect infrared thermal radiation effectively. In winter, indoor heat is locked inside to reduce heating loss; in summer, outdoor solar heat is blocked to cut air conditioning power consumption. Double/triple silver Low-E achieves lower U-value and better energy-saving effect than single silver.

Strong UV Isolation, Prevent Interior Fading & Aging

The coating blocks up to 99% ultraviolet rays from sunlight, effectively protect indoor wooden furniture, fabric, artwork and flooring from discoloration and aging caused by ultraviolet radiation.

Anti-Condensation & Long-term Clear Vision

Double sealing structure with built-in molecular sieve desiccant isolates external water vapor, prevents internal fogging and condensation under large indoor and outdoor temperature difference, always keeps glass surface transparent.

Optional Warm Edge Spacer for Lower Heat Bridge

Support warm edge spacer customization to reduce edge heat transfer, greatly decrease edge condensation risk, further upgrade overall thermal insulation performance of window system.

Moderate Noise Reduction & Safe Tempered Structure

Sealed air cavity weakens outdoor medium and high frequency noise, improve indoor comfort. Both sides adopt tempered safety glass, high impact resistance, conform to international building safety standards.